 班.级.规.模.及.环.境--热.线:4008699035 手.机:15921673576( 微.信.同.号) |
|
坚持小班授课，为保证培训效果，增加互动环节，每期人数限3到5人。 |
| 上.课.时.间.和.地.点 |
上课地点：【上海】：同济大学(沪西)/新城金郡商务楼(11号线白银路站) 【深圳分部】：电影大厦(地铁一号线大剧院站)/深圳大学成教院 【北京分部】：北京中山学院/福鑫大楼 【南京分部】：金港大厦(和燕路) 【武汉分部】：佳源大厦（高新二路） 【成都分部】：领馆区1号（中和大道） 【沈阳分部】：沈阳理工大学/六宅臻品 【郑州分部】：郑州大学/锦华大厦 【石家庄分部】：河北科技大学/瑞景大厦 【广州分部】：广粮大厦 【西安分部】：协同大厦
最近开课时间(周末班/连续班/晚班）：即将开课，详情请咨询客服！ |
| 实.验.设.备 |
☆资深工程师授课
☆注重质量
☆边讲边练
☆合格学员免费推荐工作
★实.验.设.备请点击这儿查看★ |
| 质.量.保.障 |
1、免费重修；
2、课程结束后,授课老师留联系方式,保障培训效果,免费技术支持。
3、推荐机会。 |
课程大纲 |
| |
numeca用户手册系列3—autoGrid自动网格划分培训
课程名称：User Manual AutoGrid™ v4 Automated Grid Generator for Turbomachinery
课程大纲：
CHAPTER 1: Overview
1-1 Introduction
1-2 AutoGrid™ v4 GUI
CHAPTER 2: Getting Started
2-1 Starting AutoGrid™ v4
2-2 Set Up Settings
2-3 Flow Path Settings
2-4 Blade-to-Blade Mesh Control
2-5 3D Mesh Generation
2-6 Save Project
CHAPTER 3: Geometry Definition
3-1 Introduction
3-2 Geometry Turbo Files
CHAPTER 4: Mesh Generation
4-1 Blade To Blade Mesh Control & I-Topology
4-2 Mesh with Tip Clearance
4-3 Mesh with Hub Clearance
4-4 HOH Mesh for Highly-Staggered Blade
4-5 Blade with Blunt Leading Edge and/or Blunt Trailing Edge
4-6 Mesh with Splitter Blade
4-7 Discontinuities on the Hub & Shroud
4-8 Bulb - Hub Curve with R=0
4-9 Mesh around a Propeller.
4-10 Seal Leakage Defined at Shroud
4-11 Seal Leakage Connected to the Hub
CHAPTER 5: Special Features
5-1 Control Geometrical Tolerance
5-2 Control Flow Paths Generation.
5-3 Control Extension Shape
5-4 Control Leading & Trailing Edge Position
5-5 Sharp Leading & Trailing Edges
5-6 Rotor/Stator Interaction
5-7 Orthogonality Control on Periodic Faces
5-8 Visualize Surface/Curve in Meridional View
5-9 Blade Tolerance
5-10 Batch Processing
CHAPTER 6: Troubleshooting
6-1 Strange Loops on Boundaries
6-2 Blade to Blade Boundaries not Fully Defined
6-3 Problems & Bug Reports
CHAPTER 7: Output Files
7-1 Template & Geometry Files
7-2 Grid Files
|
首页 课程表 在线聊 报名 讲师 品牌 QQ聊 活动 就业